STANDARD CONFIGURATION:
5 in 1 receiver board; 3.7V 240mah LI-PO battery; N40 brushed motor; tail motor; 2g servo(5 lines)x3; USB charger cable; USB power supply; special screw driver; 7CH LCD 2.4GHz Radio control.
Receiver adjustment:
1. Receiver's indicator light status indicte:slowly flash means receiving signal,fast flash means the gyro is initializing,constant light means signal received,no lights on means no signal received.
2. Elevator/aileron sensitivity adjusting knob: clockwise, adjust to(+) direction,increase gyro sensitivity will add the balance effect of fushlage(fuselage no shake is the best);anticlockwise,adjust to (-) direction, reduce gyro sensitivity will decrease the balance effect of fuselage.
3. Code-pairing: short press the button of the receiver,receiver start code-pairing ,the indicator light flash slow. Code-pairing succeed,the light will flash fast(when boot) or constant light(when work)
One key Switchover process:
Switch: move Hold Up to the "on" position,move IDLE safely to the "0" position, move 3D gear to the "0" position
1. please fly the helicopter to steady state first,keep with horizontal plane, the height is above 2 meters,the tail of helicopter is over against yourself,move the throttle to about 70%
2. keep Idle safely at "1" position, then move 3D gear to the "1" position.
3. the helicopter will 180° rotate clockwise at this time, at last rotate to the inverted flight state.
One key invert to normal flight process:
Switch: move Hold Up to the "on" position,move IDLE safely to the "1" position, move 3D gear to the "1" position
1. please fly the helicopter to steady state first,keep with horizontal plane, the height is above 2 meters,the tail of helicopter is over against yourself,move the throttle to about 70%
2. keep Idle safely at "1" position, then move 3D gear to the "0" position.
3. the helicopter will 180° rotate anticlockwise at this time, at last rotate to the normal flight state.
Radio control throttle's mode:
FEATURES:
• The fuselage adopt strong,durable,special plastics
• Hi-performance 3-axis flybarless system by SKYARTEC provides with much more stability,functionality and capability.
• United design,outstanding stability and beauty.
• High standard configura,you can perform kinds of flying skills.
• Five in one receiver board integrating receiver,3-axis gyro,servo,main brushed esc,tail brushed esc
• One key switchover,help beginner to accomplish acrobatic flight.
Description:
Item Name:Skyartec WASP AUTO CP
Brand:Skyartec
Battery: 3.7v 240mAh Lithium Battery
Length: 225mm
Height: 76mm
Main Rotor Diameter: 240mm
Tail Rotor Diameter: 36mm
Motor Pinion Gear: 9T
Main Drive Gear: 67T
Flying Weight: 48g
Standard Configuration:
5-in-1 Receiver Board
3.7V 240mAh LI-PO Battery
3 x 2g Servo (5 lines)
USB Charging cable
USB Power Supply
Screw Driver
Skyartec CD (contains user manual)
7CH LCD 2.4GHz Transmitter. (Mode 2 only; instructions are provided to manually convert to Mode 1)
No comments:
Post a Comment