The Walkera Super CP offers brilliant performance in a completely "Ready to Fly" package. From basic hovering to all out 3D aerobatics, the Super CP does it all! The high precision 3-axis flybarless system provides ultra-stable flight characteristics that are great for both beginners and advanced pilots alike.
When it comes to micro helis, the Super CP is about as tough as it gets. We crashed this heli countless times during our "testing" and failed to break a single part. It just keeps going and going. What's great about this is that it takes away the fear of crashing, allowing you to focus on improving your flying skills. It's the ideal model for learning inverted flight!
Super CP Specification:
1 Overall Length: 220mm
2 Main Rotor Dia. : 241mm
3 Tail Rotor Dia. : 42mm
4 All-up Weight: 45g (Battery included)
5 Motor is same as Genius CP's
6 Transmitter (Optional): DEVO-6S/7/7E/F7/10/8S/12S (not included)
7 Servo: wk-02-4;weight: 2.42g;speed: 0.12sec/60 (3.0~4.5V);dimension: 16.5*6.8*15.7mm
8 Battery: 3.7V 240mAh Li-Po
9 Receiver
Super CP Advantage:
Quick cyclic input.
Long flight time.
Light weight construction.
Solid tail.
Parts compatible to lot of other walkera model.
Walkera Devo 7E Transmitter Mode 2 Specification:
Battery: 4 x AA cells (No included)
Also has a JST plug for an alternative power pack.
7 Channels Function: Elevator, Aileron, Throttle, Rudder, Pitch, Gear(Throttle Hold switch) and Aux2(Flight Mode switch).
Smaller size and half the weight compared to a Devo 10.
Charging and DSC ports on back for your PC Sim.
There's the familiar SYSTEM for all the controls of the TX which affect everything, Display, Buzzer, Vibration Alert.
Like the rest of the Devo series it's upgradable online with a USB port so you can always get the latest available features that the Techies at Walkera are working on.
The upgrade process is very well done, the boot part of the chip isn't affected so the risk of damaging the TX during an upgrade is much reduced.
Good for flying most models up to 500m away or so without any difficulty and keeps the unit simple.
Reviews:
For the first flight I keep everything as factory setting. The helicopter feel very responsive. Only the rudder is slight slower than torque tube helicopter. But quite similar to other tail motor mini helicopter. The cyclic input react quite fast to stick input, without any delay. After 7min flight the battey still have power left. Should able to fly over 8min. The main motor is quite cold. Only 36 degree C after 7min flight. (that 7 min I keep pushing the heli up and down quickly to put extra load on the motor and see how it perform). And another thing I notice as these mini heli with separate tail motor sometimes the tail will drift slightly during heavy load. But I did not have any drift with this one. I am sure walkera had done something to the gyro and the tail motor to fix this.
The difference between the mini-cp is its they are look the same, size the same and parts are same. The one big difference is the factory took away servo controlling chip from all servos and built them on one receiver.
http://www.banggood.com/buy/super-cp.html
No comments:
Post a Comment